Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 56)

Working with the ApplicationTemplate
Remove the instances of a machine module
56
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.5 Remove the instances of a machine module
The previously inserted instances of a machine module have to be removed from the global variable
lists in the
A55_VarLists folder.

How to proceed:
1. Double-click the A55_VarLists folder.
2. Double-click the global MM_Dcl variable list.
3. Right-click the instance to be deleted (example: NewModule):
8.6 Removing machine modules
In order to remove a machine module including all instances from the »PLC Designer« project,
execute the
Delete command.

How to proceed:
Right-click the module name in the A70_MachineModuleSources folder and execute
the Delete command.
8.7 Module ID
[8-2] Example: Structured overview of the components of an MFB_MachineControl of the MM_Machine machine module
• Each machine module can be identified by a unique module ID
which is stored in every MFB of the machine module in each
case.
• The module ID is defined with the name CompID in the
BaseChannel and can be set by the setCompIDAndVersion()
method.