Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 147)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
147
Appendix
Recipe manager
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.4.5.2 ReadAndSaveRecipeAs
...transfers the current PLC values to the recipe/file specified.
[12-8] Program example: Transfer the current PLC values to the recipe/file "Recipe_2011_10_01.txtrecipe"/"Recipe2".
Initial situation - MM_Par_Modul1 recipe definition:
Result:
VAR
_RecipeManCommands : RecipeManCommands;
_stRecipeDef : STRING := 'MM_Par_Modul1'; [name of the recipe definition]
_stRecipe2 : STRING := 'Recipe2'; [name of the recipe]
_stFileName1: STRING := 'Recipe_2011_10_01.txtrecipe';
END_VAR
MM_Par.scModule1.lrVel := 22;
MM_Par.scModule1.lrAcc := 12;
MM_Par.scModule1.lrDec := 13;
_RecipeManCommands.ReadAndSaveRecipeAs(_stRecipeDef,_stRecipe2,_stFileName1);
• Column shows the current PLC values.
• Column shows the recipe ("Recipe1")
• The recipe/file
"Recipe_2011_10_01.txtrecipe" is created
on the controller.
[12-9] Sample output file/recipe
"MM_Par_Modul1/"Recipe2"
• The current PLC values are visible in the
recipe/file.