Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 158)

Application example: Flying saw
Creating and integrating machine modules
158
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5. Connecting the machine modules in the MMT
Defining the processing order of the machine modules according to the data flow.
Menu command: CFCProcessing orderShow according to data flow
13.3.3 Managing module applications of the machine modules
Module applications (MAPs) which are not required may be deleted, provided that one MAP per
machine module is available.
[13-4] Example: Module applications App1...App3 of machine control module MM_MachineControl

How to proceed:
1. Deleting module applications which are not required.
• Subfolders which are not required must be deleted from the folder of the machine
module in the device tree, example: ModApp2, ModApp3.
• Right-click the subfolder Delete.
2. Deleting instances which are not required from the declaration part in the MFB.
• Double-click and open the desired MFB of the machine module.
• Deleting instances which are not required from the declaration part.

Note!
If a MAP is deleted, please observe that the corresponding instances in the respective
MFB must also be deleted.