Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 52)

Working with the ApplicationTemplate
Creating your own machine modules: Copy/insertMM_EmptyModule
52
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. Enter the desired module name.
The module name can be selected freely and …
• must not contain "MM_"
• may only contain the characters "A ... Z", "a ... z", "0 ... 9"
• must not contain any special characters.
4. Click Insert to insert the machine module.
• The machine module has been inserted with the applicable names of the MAPs/MFB,
structures, and visualization.
5. The machine module inserted (MFB_*) is to be inserted in the MMT in the
A10_MachineModuleTree folder.
6. The module application (MAP_*) in the A11_ModuleAppCalls folder is to be inserted in
the desired module application call (MAC_Task_*).