Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 113)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
113
The L_EATP_ApplicationTemplate library
Automatically generated functions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.1.4 GetTextProperty (automatically generated by »PLC Designer«)
The function provides textual project information of the library.
Inputs
Outputs
11.1.5 GetTitle (automatically generated by »PLC Designer«)
The function provides the title of the library.
Outputs

Note!
This function must always be used with the corresponding name area of the related
library. (for instance IOStandard.GetText"Author"))
GetTextProperty
WSTRING ⎯ stKey GetTextProperty ⎯ WSTRING
Identifier/data type Information/possible settings
stKey
WSTRING
Key of the project information
• "Company" - name of the library provider
• "Title" - name of the library
• "DefaultNamespace" - name area of the library
• "Project" - name of the library
• "Description" - description of the library
• "Author" - author of the library
Identifier/data type Information/possible settings
GetTextProperty
WSTRING
Value of the project information

Note!
This function must always be used with the corresponding name area of the related
library. (for instance IOStandard.GetTitle())
GetTitle
GetTitle ⎯ WSTRING
Identifier/data type Information/possible settings
GetTtitle
WSTRING
Name of the library