Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 145)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
145
Appendix
Recipe manager
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• The variables assigned can be viewed on the tab of the recipe definition:
• After the "log in", the data of the PLC variables are available under .
12.4.4 Inserting recipes into a recipe definition

How to proceed:
1. Insert recipe into the recipe definition (example: MM_Par_Modul1): Right-click Add
recipe:
• Allocate desired name.
• Under "Copying of:", the recipes that are already available can be selected.
• Click OK to insert the recipe.
• Result: The recipe inserted (example: Recipe1) is visible as a further column in the recipe
definition. Assign the desired values in the column to the recipe.
Via RecipeManCommands, further recipes can be managed from the PLC program.