Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 125)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
125
The L_EATP_ApplicationTemplate library
1_POUs - Program Organization Units
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.2.10 L_EATP_ModulRelations
This FB provides an overview of how the machine modules are linked.
• This FB can for instance be used to retrace whether the interconnection of structures and the
assignment of the module address have worked.
Inputs
Outputs
Function library: L_EATP_ApplicationTemplate
Runtime software licence: LPC 1x00 MPC 1x00
MPC 2x00
MPC 2x10
MPC 2x20
MPC 2x30
MPC 3x00 ; None
L_EATP_ModuleRelations
BOOL ⎯ Enable numberOfModules ⎯ INT
relationsAsString ⎯ BOOL
Success ⎯ BOOL
Identifier/data type Information/possible settings
Enable
BOOL
In the case of a positive edge, the module analysis will start.
Identifier/data type Information/possible settings
numberOfModules
INT
Number of machine modules identified
relationAsString
ARRAY [1...30] OF STRING
For every master-slave relation identified, there is an entry with the corresponding
master and slave in the array.
• The entry has the following structure: [
address>] -> []
Example: MachineModule[1] -> InFeed[3]
Success
BOOL
Supplies a response stating whether the analysis has been correct.
TRUE Analysis executed correctly.
FALSE An error has occurred during the analysis