Apple LaserWriter 12/640 PS - Manual (Page 70)

8 Press the Ins key, then type a descriptive name for your printer server.
This can be any name, but in general you should be able to glance at the
object and know what its purpose is (for example “12_640_Server”).
Creating a printer
1 Select the name of the print server you specified in “Step 2, Option A: Setting Up the
Printer as a Print Server (Using PCONSOLE)”; then press Enter.
2 Use the arrow keys to highlight Printers in the Print Server Information menu, and
press Enter.
This lets you configure the new print server.
3 Press the Ins key to display printers in your current context in the NetWare Directory
Services tree.
4 Press the Ins key to create a new printer in the NetWare Directory Services tree.
The context listed at the top of the screen should still list the server’s bindery
context that was set earlier. If this is not the case, change the context to the
correct context before creating the printer.
5 At the prompt, type the new printer name and press Enter.
6 Select the name of the printer you specified in the previous procedure and press Enter.
This adds the printer to the Serviced Printers list of the print server.
Creating a print queue
1 From the Serviced Printers menu list, select the name of the printer you specified in the
previous procedure, and press Enter.
A Printer Configuration menu appears.
2 From the Printer Configuration menu, use the arrow keys to highlight Printer type, and
press Enter.
3 From the Printer Type menu, use the arrow keys to highlight Other/Unknown, and
press Enter.
This makes your selection active, and brings you back to the Printer
Configuration menu.
70 Chapter 3