Apple LaserWriter 12/640 PS - Manual (Page 270)

2 To confirm that you want to restart the printer, click Restart.
When the printer Ready light stops blinking, the printer is ready to print.
The same effect can be achieved by physically turning the printer on and
off again.
IMPORTANT If the LaserWriter 12/640 PS is on a network shared by other
users, make sure that no one is attempting to use the printer when you
restart it. If someone’s printing job is canceled, they must resubmit it.
Manually downloaded fonts are removed from the printer’s RAM when you
restart the printer.
Printing a configuration page
You can print a listing of the current configuration settings and other
information about the printer. This page serves as a reference whenever you
connect a computer to the printer.
m
Choose Print Configuration Page from the Utilities menu.
Using the Apple LaserWriter Utility for Windows
The Apple LaserWriter Utility for Windows program lets you change the
default settings that control how various aspects of the printer work. The
utility is placed in the Apple LaserWriter Software program group when the
printer software is installed. Use it to set optional printer parameters that you
want to use for all documents.
IMPORTANT Be sure the printer you want to configure is selected as the default
printer prior to opening the Apple LaserWriter Utility for Windows.
To change printer settings for a specific document (without changing the
printer’s basic default settings), use the Print and Print Setup dialog boxes.
Network users should use the Print and Print Setup dialog boxes to choose
the individual settings for their documents.
270 Appendix A