Using the apple laserwriter utility for windows – Apple LaserWriter 12/640 PS User Manual
Page 172
6
Choose OK.
The Connect dialog box closes, and you are returned to the Printers
dialog box.
7
If you changed any printer settings to print a PostScript file, choose Setup to display the
Setup dialog box. Undo any changes you made and then choose OK.
The Printers dialog box appears.
8
Select OK to close the Printers dialog box.
9
Choose Exit from the Settings menu to close the Control Panel.
DOS notes
If you are using DOS programs, refer to the manual that came with your
program and follow the instructions for using a PostScript printer. Most DOS
programs are PostScript compatible.
Capturing a print queue for DOS printing
From DOS, you can use the NetWare
CAPTURE
command to map the
parallel port to a print queue.
m
Log in to the NetWare network and enter the
CAPTURE
command, using the
following syntax:
CAPTURE /q=
queue_name
local=
lptnumber
server=
server_name
job=
new
Unless you specify otherwise, the command assumes that you are mapping
the LPT1 port to a queue.
Using the Apple LaserWriter Utility for Windows
The Apple LaserWriter Utility for Windows program supplied with the
printer software lets you control various aspects of how the printer works. For
information about using the Apple LaserWriter Utility for Windows, see
Appendix A.
172
Chapter 7