Apple LaserWriter 12/640 PS - Manual (Page 55)

10 Click Next when the Installer prompts you to add a PostScript printer to your system.
A message appears that lets you install the setup program onto your
hard disk.
11 Select Yes, if desired, and click Next.
The Setup Program Location dialog box appears.
12 Enter a new directory for the printer drivers or use the default directory and click Next.
A message appears that lets you specify how your printer is connected (local
or network).
13 Select how your printer is connected (local or network) and click Next.
The Install PostScript Printer from PPD dialog box appears.
14 Eject LaserWriter Disk 2 for Windows 95 and insert LaserWriter Disk 3 for Windows 95.
The PostScript PPD files are located on LaserWriter Disk 3 for Windows 95.
15 Choose a: or b: (depending on which drive holds your installation disk) from the Drives
list box.
16 Select LW 12/640 PS from the PostScript Printer Drivers Available list and
click Next.
17 Select LPT1 if the LaserWriter 12/640 PS is connected to your local computer.
18 Click Next.
The Add Printer dialog box appears.
19 Name your printer and select other options as necessary.
20 Click Next.
The printer Properties dialog box appears.
21 Click OK to dismiss the Properties dialog box.
A message appears telling you that the driver software was successfully
installed.
55 Setting Up the Printer for Windows, DOS, and NetWare Users