Apple LaserWriter 12/640 PS User Manual
Page 66
Creating a printer
1
Select the name of the print server you specified in the previous procedure and
press Enter.
2
Use the arrow keys to highlight Printers in the Print Server Information menu, and
press Enter.
This will let you configure the new print server.
3
Press the Ins key to display printers in your current context in the NetWare Directory
Services tree.
Note: You may have created a printer earlier. This example assumes that the
printer has not yet been created.
4
Press the Ins key to create a new printer in the NetWare Directory Services tree.
Make sure that the context listed at the top of the screen still lists the server’s
bindery context that was set earlier. If not, change to the correct context
before creating the printer.
5
At the prompt, type the new printer name and press Enter.
This name will be used for reference, so use a name that will be meaningful
to the NetWare administrator or to other users who may wish to check on the
printer’s status. This step creates the printer object in the NDS tree.
6
Select the name of the printer you specified and press Enter.
This adds the printer to the Serviced Printers list of the print server.
7
From the Serviced Printers menu list, select the name of the printer you specified in the
previous procedure, and press Enter.
This brings up the Printer Configuration menu.
8
From the Printer Configuration menu, use the arrow keys to highlight Printer type, and
press Enter.
9
From the Printer Type menu, use the arrow keys to highlight Other/Unknown, and
press Enter.
This makes your selection active, and brings you back to the Printer
Configuration menu.
66
Chapter 3