Apple LaserWriter 12/640 PS - Manual (Page 289)

Configuring ATPS for the first time on a NetWare 4 server
If you are setting up the printer for access by Mac OS–based computers on a
NetWare 4 network and this is the first time you are configuring ATPS, follow
these instructions.
You can configure ATPS from the server console, or by running RCONSOLE
(remote console) from a client computer.
1 At the console prompt, type
load install
The Install utility starts and a list of Installation Options appears.
2 Choose the Maintenance/Selective Install option and press Enter.
An additional list of product options appears.
3 Select Product Options from the list and press Enter.
A list of product options appears. If the NLM is installed and operating, a
NW-MAC option will be available.
4 Select the NW-MAC option and press Enter.
A list of configuration files appears.
5 Select Configure Printer Services and press Enter.
A list of print service configuration options appears.
6 Select Quick Configuration and press Enter.
A list of lookup parameter options appears.
7 Select the Printer Model entry and press Enter.
A list of printer types appears.
8 Select the LaserWriter 12/640 PS option and press Enter.
9 In the lookup parameter list, change the zone name to the zone in which the printer is
currently located.
10 Select the Perform Lookup option and press Enter.
290 Appendix B