beautypg.com

Printing the page count, Specifying a font symbol set, Restarting the printer – Apple LaserWriter 12/640 PS User Manual

Page 281

background image

Printing the page count

The LaserWriter 12/640 PS stores a running total of the number of pages it
has printed. This total is printed on the startup page when you start the
printer (if the startup page option is turned on). You can also print it using
the Apple LaserWriter Utility for Windows.

m

Choose Print Page Count from the Utilities menu.

A page prints listing the number of pages printed to date.

Specifying a font symbol set

You can use the Apple LaserWriter Utility to specify a font symbol set for use
in HP LaserJet emulation.

1

Choose Font Symbol Set from the Utilities menu.

The “Specify a Symbol Set” dialog box appears.

2

Select a symbol set from the list box and click OK.

Restarting the printer

You may need to restart the printer to clear its memory if you have any
problems printing. For information on troubleshooting printing problems, see
Chapters 11 and 12.

1

Choose Restart Printer from the Utilities menu.

A dialog box appears, asking you to confirm that you want to restart the
selected printer.

2

Click Restart.

It takes a few minutes for the printer to restart and be ready to print.

The same effect can be achieved by turning the printer off and then on again.

IMPORTANT

If the LaserWriter 12/640 PS is on a network shared by other

users, make sure that no one is attempting to use the printer before you
restart it.

281

Setting the Printer Default Settings