Apple LaserWriter 12/640 PS - Manual (Page 190)

Details
Click the Details tab to display the Details tab dialog box, which controls the
printer port. The Details tab is available only if you open the printer
Properties dialog box through the Printer folder.
m
Print to the following port Lets you specify the port your printer is attached to
or the path to the network printer you’re using.
m
Add Port Click to add a new port or to specify a new network path.
m
Delete Port Click to delete a port from the “Print to the following port” list
box.
m
Print using the following driver Lets you specify the type of printer you’re
using.
m
New Driver Click to update your printer driver.
m
Capture Printer Port Click to map a port to a network drive.
m
End Capture Click to remove a port from a network drive.
190 Chapter 8