Apple LaserWriter 12/640 PS - Manual (Page 68)

Completing the PSERVER configuration
1 Start Windows, if it’s not already running.
2 In the Program Manager window, open the Apple LaserWriter Software program group
and double-click the Apple LaserWriter Utility icon.
3 Select your printer.
4 Select Print Server Configuration from the Network menu.
5 Select the printer you want to configure.
You can identify the printer from the NetWare printer name that is printed on
the printer’s startup page.
IMPORTANT After the printer is turned on, it advertises itself on the NetWare
network for 5 minutes only to reduce network traffic. If you don’t see your
printer’s name in the list of printers, turn the printer off and back on. Make
sure the NetWare file server is running, and verify that the NetWare file
server and the printer are using the same Ethernet frame type. If the Ethernet
frame types do not match, see “Connecting to a Network Printer Manually”
in Appendix A. See also “Novell NetWare Troubleshooting” in Chapter 12.
6 Select the LaserWriter 12/640 PS printer you want, then click Configure.
7 Enter the PSERVER name.
Use the same printer name you used in PCONSOLE (if you are not using the
default name).
8 Enter the same NetWare password that you entered with PCONSOLE.
9 Enter the names of file servers that the printer will service.
10 Click Add.
11 Click OK.
12 Enter the queue scan time.
The queue scan time is the number of milliseconds that the printer will wait
before checking each file server that it can access.
13 Click Send.
68 Chapter 3