Apple Shake 4 Tutorials - Manual (Page 39)

Chapter 1 Shake Basics 39
7 In the lMult1 parameters, drag the percent slider to set it to 65.
Next, composite the lighting pass.
8 Select the lMult1 node and insert a Layer–Screen node.
9 Connect the lighting node to the second input of the Screen1 node.
Not again! In the Viewer, you’ll see a clipped image, similar to what you saw earlier in
this tutorial.
Move the pointer over the lighting node and you’ll see it has a resolution of 360 x 243.
This resolution is obviously not the desired output.