SkyTrak 6036 Service Manual User Manual
Page 377
9.25
Model 6036 Legacy
Electrical System
Dash panel charge
indicator ON continuously.
Replace instrument cluster.
Check alternator at
terminal “B+” for voltage
output of 13.8-14.2 volts.
If OK
On alternator, check wire 2W
(BLK) to ground.
Not
OK
Replace alternator.
If OK
Before troubleshooting any
electrical circuit, ALWAYS
begin by checking the
following:
1. Fuses.
2. All connections relating
to circuit are clean and
tight.
3. Check that bulb is OK.