Warning – SkyTrak 6036 Service Manual User Manual

Page 131

4.27

Model 6036 Legacy

Cab and Covers

Figure 4-44 Disconnect Control Cables at Joysticks

12. Vehicles equipped with auxiliary hydraulics only:

Remove the auxiliary hydraulics joystick assembly.
(Refer to Section 4.3.7, a. “Auxiliary Hydraulics
Joystick Removal.”)

13. Working under the cab, label and disconnect the

hydraulic hoses (Fig. 4-45, 1-8) at the cab fittings.
Plug the hoses and cap the fittings.

Figure 4-45 Disconnect Hydraulic Hoses

14. Remove six hex-head capscrews, six lockwashers

and six flat washers (Fig. 4-46, 1) securing the
access panels to the frame. Remove the upper (2)
and lower (3) transmissions covers.

Figure 4-46 Remove the Upper and Lower

Transmission Covers

15. Unlock and open the right engine access door.

WARNING:

Hydraulic fluid leaking under

pressure can penetrate the skin, cause
infection, gangrene, and death or serious
personal injury. If injured, see a doctor
immediately.

Relieve all pressure before disconnecting any
component, part, line or hose. Slowly loosen
parts and allow release of residual pressure
before removing any parts or component.

WARNING:

Wait for the hydraulic fluid

to cool before servicing any hydraulic
component. Hot hydraulic oil can cause severe
burns.

MA8520

MA8500

MA8620