SkyTrak 6036 Service Manual - Manual (Page 27)

2.11 Model 6036 Legacy
General Information and Specifications
2.5.3 Attachment Weights
2.5.4 Performance Specifications
Note: Performance criteria is based on full throttle engine speed unless otherwise specified or not applicable.
Std 48" Carriage with Shaft 456 lb (205 kg)
Std 60" Carriage with Shaft 526 lb (239 kg)
Std 72" Carriage with Shaft 677 lb (307 kg)
48" Side Tilt Carriage with Shaft and Cylinder 687 lb (312 kg)
60" Side Tilt Carriage with Shaft and Cylinder 752 lb (341 kg)
72" Side Tilt Carriage with Shaft and Cylinder 770 lb (347 kg)
52" Swing Carriage with Shaft and Cylinder 950 lb (428 kg)
72" Swing Carriage with Shaft and Cylinder 1,135 lb (511 kg)
Bucket, 1.125 yd
3
(0,855 m
3
)
760 lb (342 kg)
Broom, 8 foot (2,44 m) 1,100 lb (495 kg)
Pallet Forks, 2" x 4" x 48" (5,7 x 10 x 122 cm), quantity:
2 278 lb (127 kg)
Pallet Forks, 2.25" x 4" x 48" (5,7 x 10 x 122 cm), quan-
tity: 2 312 lb (141 kg)
Block Forks, 2" x 2" x 48" (5 x 5 x 122 cm), quantity: 6 480 lb (216 kg)
Lumber Forks, 1.75" x 7" x 60" (4 x 17,8 152,4 cm),
quantity: 2 466 lb (210 kg)
12 ft Truss Boom 470 lb (213 kg)
Auger Drive Unit 285 lb (128 kg)
Auger Mounting Frame 180 lb (81 kg)
Auger (Various Sizes Available) Varies
Auger Extension (Various Sizes Available) Varies
Travel Speed (Standard Tires, No Load)
First Gear 0-3.5 mph (0-5,6 km/hr)
Second Gear 0-6 mph (0-9,7 km/hr)
Third Gear 0-14 mph (0-23 km/hr)
Fourth Gear 0-20 mph (0-32 km/hr)