SkyTrak 6036 Service Manual - Manual (Page 103)

3.63 Model 6036 Legacy
Boom
10. Excessive chain wear. 1. Improper chain adjustment.
2. Chain sheave(s) not properly
lubricated.
3. Chain sheave(s) not rotating
freely.
4. Improper chain lubrication.
1. Adjust to correct tension. (Refer
to Section 3.3.7, c. “Boom Chain
Tension Check.”) Replace
chain(s) as needed. (Refer to
Section 3.3.7, e. “Chain
Replacement.”)
2. Lubricate chain sheave. (Refer
to Model 6036 Legacy Owners/
Operators Manual.)
3. Lubricate chain sheave. (Refer
to Model 6036 Legacy Owners/
Operators Manual.) Repair or
replace chain sheave(s) as
needed.
4. Lubricate at regular intervals.
(Refer to Model 6036 Legacy
Owners/Operators manual.)
Replace chain(s) as needed.
(Refer to Section 3.3.7, e.
“Chain Replacement.”)
Boom Troubleshooting (Continued)
Problem Cause Remedy