Sandvik Coromant Heat resistant super alloys User Manual
Page 42
40
S-RCMX -SM
Fits in ceramic holders which reduces
both the number of tools required and tool
change over:
• Finishing operations
• Mixed production of titanium and HRSA
Secure solution with chip breaker giving
excellent productivity and chip control.
S-RCMX 060600-SM, dia 6 mm
S-RCMX 090700-SM dia 9 mm
S-RCMX 120700-SM, dia 12 mm
S05F – first choice HRSA
H13A – first choice titanium
S-SNMM-SR
An optimized geometry for machining HRSA
materials, with forged skin, in the soft con-
dition (26 HRC). To be able to take largest
depth of cut possible to minimize inter-
rupted cutting in scale use: square iC 19 or
25 –
k
r
75°
S-SNMM 250924-SR 2015 or 2025
S-SNMM 190616-SR 2015 or 2025
S-WCMX-GM
Optimized geometry with excellent chip
control. High productivity for plunging opera-
tions.
• Wide, deep grooving – 16 mm
• Screw down inserts – no top clamp
• Can be used with HPC or UHPC
S-WCMX 120408-GM
GC1105 – first choice for HRSA
H13A – first choice for titanium