Sandvik Coromant Heat resistant super alloys User Manual
Heat resistant super alloys, Application guide

APPLICATION GUIDE
Heat resistant super alloys
C-2920:034 ENG/03 © AB Sandvik Coromant 2010.08
This folder is printed on recycleable paper. Printed in Sweden at Sandvikens Tryckeri
INDONESIA
Jakarta:
P.T. SANDVIK INDONESIA
Mugi Griya Building
3rd Floor
Jl. MT. Haryono Kav. 10
JAKARTA 12810
Tel: 62-21 831 4141/2
Fax: 62-21 830 8573
Tel Toll Free: 0-800-1-C O R O - I D
(0-800-1-2 6 7 6 - 4 3)
Fax Toll Free: 0-800-1-7 0 0 - 8 0 0
E-mail: [email protected]
SINGAPORE
Sandvik South East Asia
PTE Ltd
50 ALPS AVE.
#04-00, Sandvik Building
SINGAPORE 498782.
Tel: 65–6477 3786
Fax: 65–6477 3783
E-mail: [email protected]
MALAYSIA
Petaling Jaya:
SANDVIK MALAYSIA SDN BHD.
A-5-2. Jaya One.
72A, Jalan Universiti,
46200 Petaling Jaya,
Selangor Darul Ehsan.
Malaysia.
Tel: 60 3 7947 7688 (Hotline)
60 3 7947 7777
Fax: 60 3 7947 7766
E-mail: [email protected]
THAILAND
Bangkok:
SANDVIK THAILAND LTD
4th Floor Chamnan Phenjati
Business Center Bldg, 65/48
Rama 9 Rd., Huay-Kwang
BANGKOK 10310
Tel: 66–2–643 8120
Fax: 66–2–614 3111 to 3
E-mail: [email protected]
PHILIPPINES
Manila:
SANDVIK PHILIPPINES INC.
Km 20 East Service Road
South Superhighway
MUNTINLUPA CITY 1770
Tel: 63–2-807 6372 to 82
Fax: 63–2-807 6383
E-mail: [email protected]
VIETNAM
Ho Chi Min City:
Representative Office of Sandvik
South East Asia Pte Ltd
5th Floor,
Vietnam Economic Times Building
1/1 Hoang Viet Street, Ward 4,
Tan Binh District, Ho Chi Minh City,
Vietnam.
Tel: 84-8-3948 4138 (Hunting line)
84-8-3948 4139 / 149 / 159
Fax: 84-8-3948 4129
E-mail: [email protected]
www.sandvik.coromant.com
Document Outline
- APPLICATION GUIDE Heat resistant super alloys
- Contents
- Introduction
- 1. Heat resistant super alloys – HRSA
- 2. Turning of nickel-based materials
- 3. Turning of cobalt-based materials
- 4. Milling
- Production planning process
- Typical components
- Machining strategy
- Cutter concept
- Milling process with indexable inserts
- Face milling with carbide inserts
- End milling/90 degree approach
- Ceramic milling
- Solid carbide – CoroMill Plura inHRSA machining
- Exchangeable-head CoroMill 316in HRSA machining
- Component/feature based solutions
- Recommended start cutting data
- 5. Hole making
- 6. Technical data
- 7. Material cross-reference list