HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 84)

Item Options Values Explanation
TRAY 2*
TRAY 3
TRAY 4
DESTINATION ALL BINS
OUTPUT BIN 1*
OUTPUT BIN 2
OUTPUT BIN 3
Specify which output bin to
use during the paper path
test.
This menu displays only if the
output bin is installed.
DUPLEX OFF*
ON
Specifies if the duplexer is
included when the test is
performed.
COPIES 1*
10
50
100
500
Specifies how many sheets
of paper from the specified
source are sent when the test
is performed.
MANUAL SENSOR TEST Tests the paper path sensors
and switches for correct
operation. During this test,
the MFP is offline.
On the control-panel display,
each sensor is represented
by a string of alphabetic
letters followed by a
corresponding status for
each sensor.
MANUAL SENSOR TEST 2 Performs tests to determine
whether the paper path
sensors are operating
correctly.
COMPONENT TEST TRANSFER MODE
BELT ONLY
IMAGE DRUM MOTORS
BLACK LASER SCANNER
CYAN LASER SCANNER
MAGENTA LASER
SCANNER
YELLOW LASER
SCANNER
FUSER MOTOR
FUSER PRESSURE
RELEASE MOTOR
This menu item is used by a
service technician to
exercise individual parts of
the MFP to isolate the source
of any problems.
64 Chapter 2 Using the control panel ENWW