beautypg.com

HP Color LaserJet 4730 Multifunction Printer series User Manual

Page 294

background image

Control panel message

Description

Recommended action

[TYPE] [SIZE]

alternates with

Ready

TRAY X OPEN

For help press

alternates with

Ready

The specified tray is open or not closed
completely.

Close the tray.

TRAY XX SIZE=

Setting saved

The size selected from the menu has been
saved.

No action is necessary.

TYPE MISMATCH

TRAY X=[TYPE]

For help press

alternates with

Ready

The paper type loaded in the tray does not
match the paper type configured for the tray.

1.

Adjust the side and rear guides against
the paper.

2.

If necessary, touch

OK

after the tray is

closed to change the paper size or type
configuration to match the paper loaded
in the tray.

Unable to mopy job

alternates with

Processing...

The print job cannot be mopied because of a
memory, disk, or configuration problem. Only
one copy will be produced.

Install additional memory in the MFP or install
a disk drive in the MFP.

UNABLE TO SEND

To temporarily hide this message in order to
fax or send to e-mail, touch

IGNORE

. If the

message persists, contact an HP-authorized
service or support provider. See the HP
support flyer, or go to

http://www.hp.com/

suppport/clj4730mfp

.

Unable to send Fax. Please check fax
configuration.

The MFP was unable to send the fax.

Contact the network administrator.

UNABLE TO SEND JOB

To temporarily hide this message in order to
fax or send to e-mail, touch

IGNORE

. If the

message persists, contact an HP-authorized
service or support provider. See the HP
support flyer, or go to

http://www.hp.com/

suppport/clj4730mfp

.

Unable to Store Job

JOB NAME

alternates with

Processing...

A job cannot be stored because of a memory,
disk, or configuration problem.

Install additional memory in the MFP, or
install a disk drive into the MFP. If a disk drive
is installed, delete previously stored print
jobs.

USE TRAY X

[TYPE] [SIZE]

To change touch or

To use touch OK

The MFP is offering a selection of alternate
paper to use for the print job.

1.

View tray configurations (type and size)
using the scroll bar.

2.

Touch

OK

to select a tray.

3.

To return to the previous message,
touch

Back

.

274

Chapter 12 Solving problems

ENWW