HP Color LaserJet 4730 Multifunction Printer series User Manual

Page 113

Text mode
Original mode

Slide the media-width guides open to the size for the media you are using.

Load media into the tray face up.

NOTE

For best performance, load the tray completely full without splitting the ream of

paper. Splitting the ream might cause a multi-feed problem, which could result in a paper
jam. The capacity of the paper tray can vary. For example, if you are using 75 g/m

(20 lb)

paper, the tray holds a full ream of 500 sheets. If the media is heavier than 75 g/m

(20 lb),

the tray will not hold a full ream, and you must reduce the number of sheets accordingly. Do
not overfill the tray because the MFP might not pick up the paper.

NOTE

If the tray is not properly adjusted, the MFP might display an error message or the

media might jam.

NOTE

If you are duplex printing, see

Automatic two-sided (duplex) printing

for loading

instructions.

ENWW

Configuring input trays