HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 79)

Item Options Values Explanation
DHCP RENEW YES
NO*
This menu appears if CONFIGURE
METHOD was set to DHCP and a
DHCP lease for the print server
exists.
● NO (default): The current DHCP
lease is saved.
● YES: The current DHCP lease
along with the leased IP
address are released.
MANUAL SETTINGS (Available only if CONFIG METHOD
is set to MANUAL) Configure
parameters directly from the printer
control panel:
IP ADDRESS (n.n.n.n.) The unique
IP address of the printer, where n is
a value from 0 to 255.
SUBNET MASKm.m.m.m.: The
subnet mask for the printer, where m
is a value from 0 to 255.
SYSLOG SERVERn.n.n.n.: The IP
address of the syslog server used to
receive and log syslog messages.
DEFAULT GATEWAYn.n.n.n: The
IP address of the gateway or router
used for communications with other
networks.
IDLE TIMEOUT: The time period, in
seconds, after which an idle TCP
print data connection is closed
(default is 270 seconds, 0 disables
the timeout).
DEFAULT IP
(parameters are AUTO
IP and LEGACY) Specify the IP address to default to
when the print server is unable to
obtain an IP address from the
network during a forced TCP/IP
reconfiguration (for example, when
manually configured to use BootP or
DHCP).
● AUTO IP: A link-local IP
address 169.254.x.x will be set.
● LEGACY: The address
192.0.0.192 will be set,
consistent with older Jetdirect
products.
PRIMARY DNS Specify the IP address (n.n.n.n) of
the Primary Domain Name System
(DNS) Server.
SECONDARY DNS Specify the IP address (n.n.n.n) of
the Secondary Domain Name
System (DNS) Server.
ENWW Configure device menu 59