HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 73
Item
Values
Explanation
PostScript rules or HP rules. The values
for this menu item are ENABLED
(follows the HP rules) or Disabled.
SIZE/TYPE PROMPT controls whether
the tray configuration message and its
prompts are shown whenever a tray is
configured for a type or size other than
the type or size that is loaded in the tray.
USE ANOTHER TRAY determines
whether the MFP uses paper from
another tray of the designated tray is
empty.
DUPLEX BLANK PAGES determines
whether blank pages are duplexed.
IMAGE ROTATION determines if
images are rotated. The default is
STANDARD.
SLEEP DELAY
1 MINUTE
15 MINUTES
30 MINUTES
45 MINUTES
60 MINUTES*
90 MINUTES
2 HOURS
4 HOURS
Sets how long the MFP remains idle
before it enters sleep mode.Using sleep
mode offers the following advantages:
●
Minimizes the amount of power that
the MFP consumes when it is idle
●
Reduces wear on electronic
components in the MFP
NOTE
Sleep mode turns off
the backlight on the display, but
the display is still readable.
The MFP automatically exits sleep mode
when you send a print job, open or close
a paper tray, receive a fax, touch any
button on the control panel, touch any
part of the touchscreen, open the
scanner lid, or load media into the ADF.
To enable or disable sleep mode, see
.
WAKE TIME
List of days of the week
OFF*
CUSTOM
Sets the time that the MFP automatically
comes out of sleep mode. This feature
can be set for a different time for each
day of the week. Or, if you wish to apply
the same settings to each day, select
APPLY TO ALL DAYS
Each day displays the following values:
Hour 1–12, Minute 0–59, AM, and PM.
COPY SEND SETTINGS
For information about these settings, see
the separate table
.
PERSONALITY
AUTO*
PCL
Select the default MFP language
(personality). Possible values are
determined by which valid languages are
installed in the MFP.
ENWW
Configure device menu
53