HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 112)

Printing from Tray 2, 3, or 4
Tray 2, 3, and 4 each hold up to 500 sheets of standard paper or a 50.8 mm (2-inch) stack of labels.
Tray 2 stacks above the other 500-sheet trays. The MFP detects the other trays and shows them as
options in the control panel CONFIGURE DEVICE menu. The trays adjust for detectable media sizes;
letter, legal, A4, A5, JIS B5, and executive; and undetectable media sizes: 8.5 x 13 and Executive (JIS),
double Japan postcard, and custom. The MFP automatically detects the media size in these trays based
on the tray’s paper guide configuration. (See
Supported media weights and sizes .)
Loading detectable standard-sized media into Tray 2, 3, or 4
The following detectable standard-sized media is supported in Tray 2 and the other trays: letter, legal,
executive, A4, A5, and (JIS) B5.
CAUTION Do not print cardstock, envelopes, heavy or extra heavy paper, or unsupported sizes
of media from the 500-sheet trays. Print on these types of media only from Tray 1. Do not overfill
the input tray or open it while it is in use. Doing so can cause jams in the MFP.
1. Slide open the tray from the MFP.
2. Adjust the rear media-length guide by squeezing the guide adjustment latch and sliding the back
of the tray to the length of the media being used.
92 Chapter 4 Printing tasks ENWW