HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 276
Control panel message
Description
Recommended action
turn off then on
8X.YYYY
EIO X ERROR
The I/O accessory card in slot X has
encountered a critical error.
X Description
1: error in slot 1
2: error in slot 2
1.
Turn the MFP off then on.
2.
If the problem persists, contact
HP Support at
.
8X.YYYY EMBEDDED
JETDIRECT ERROR
This message is generated by a failure of the
embedded JetDirect print server.
Turn the MFP off then on. Press for more
information.
If the message persists, contact HP Support
at
[FS] FILE
OPERATION FAILED
To clear touch "OK".
alternates with
Ready
The MFP received a PJL file system
command that attempted to perform an
illogical operation (for example, to download
a file to a non-existent directory).
1.
To clear the message, touch
OK
.
2.
If the message persists, turn the MFP off
then on.
3.
If the message reappears, there may be
a problem with the software application.
[FS] NOT
INITIALIZED
The device has not been initialized.
You can use Web JetAdmin to initialize the
device.
[FS] NOT
INITIALIZED
To clear touch "OK".
alternates with
The Flash file system has not been initialized.
It must be initialized before it can be used.
Touch
OK
to continue.
ABCDEFGHIJYW
011000000000
alternates with
To exit press
Stop
This message is displayed when a paper path
sensor test or a paper path test is run. The
alphabetical value indicates which sensor is
being checked.
No action necessary.
Access Denied
MENUS LOCKED
An attempt has been made to modify a menu
item while the control panel security
mechanism is enabled by the MFP
administrator. The message will disappear
shortly, and the MFP will return to Ready
state.
Contact the MFP administrator to change
settings.
ADF Cover Open
The ADF cover is open.
Close the ADF cover. Follow the instructions
in the onscreen dialog box.
ADF Output Bin Full
The ADF output bin holds 50 sheets of paper.
The MFP stops when the bin is full.
Remove the paper from the ADF output bin.
ADF Paper Jam
Paper is jammed in the ADF.
Follow the instructions in the onscreen dialog
box. For more information, see
.
256
Chapter 12 Solving problems
ENWW