HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 275
Control panel message
Description
Recommended action
3.
Turn the MFP on.
4.
If this message persists, contact an HP-
authorized service or support provider.
See the HP support flyer, or go to
68.X PERMANENT
STORAGE FULL
For help press
alternates with
68.X PERMANENT
STORAGE FULL
To continue touch "OK".
A non-volatile storage device is full. Touching
OK
should clear the message. Printing can
continue, but there may be unexpected
behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
1.
Touch
OK
to continue.
2.
For 68.0 errors, turn the MFP off then
on.
3.
If a 68.0 error persists, contact
HPSupport.
4.
For 68.1 errors, use the HPWeb
Jetadmin software to delete files from
the disk drive.
5.
For 68.1 errors that persist, contact
HPSupport.
68.X PERMANENT
STORAGE WRITE FAIL
To continue touch "OK".
A non-volatile storage device is full. Touching
OK
should clear the message. Printing can
continue, but there may be unexpected
behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
1.
Touch
OK
to continue.
2.
If the message persists, turn the MFP off
then on.
3.
If the problem persists, contact
HP Support at
.
68.X STORAGE ERROR
SETTINGS CHANGED
For help press
alternates with
68.X STORAGE ERROR
SETTINGS CHANGED
To continue touch "OK".
One or more MFP settings saved in the non-
volatile storage device is invalid and has been
reset to its factory default. Touching
OK
should clear the message. Printing can
continue, but there may be unexpected
behavior.
1.
Touch
OK
to continue.
2.
If the message persists, turn the MFP off
then on.
3.
If the problem persists, contact
HP Support at
.
69.X PRINTER ERROR
For help press
alternates with
69.X PRINTER ERROR
To continue
turn off then on
An MFP error has occurred.
Turn the MFP off then on. Press for more
information.
79.XXXX
PRINTER ERROR
To continue
A critical hardware error has occurred.
1.
Turn the MFP off then on.
2.
If the problem persists, contact
HP Support at
.
ENWW
Control panel messages
255