HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 327
Fingerprints and media
dents
●
Make sure to use
supported media.
●
Make sure that the
media you are using
does not have any
wrinkles or dents from
handling, and that the
media is not
contaminated with
visible fingerprints or
other foreign
substances.
●
Print the Print Quality
Troubleshooting Pages
(see
) and follow the
diagnostic procedure
listed on the first page to
help isolate the defect to
a particular component.
Loose toner
●
Make sure that the
operation and location
requirements of the MFP
are met.
●
Make sure to use
supported media.
●
Make sure that the
media type and size for
the tray are set correctly
in the control panel for
the media that you are
using.
●
Make sure that the
media is loaded correctly
and that the size guides
are touching the edges
of the stack of media.
Make sure that the
media you are using
does not have any
wrinkles or dents from
handling, and that the
media is not
contaminated with
visible fingerprints or
other foreign
substances.
Smeared toner
●
Make sure to use
supported media.
White areas (dropouts) on
page
●
Make sure that the
operation and location
requirements of the MFP
are met.
●
Make sure to use
supported media.
●
Make sure that the
media you are using
does not have any
wrinkles or dents from
handling, and that the
media is not
contaminated with
visible fingerprints or
other foreign
substances.
●
Make sure that the
media type and size for
the tray are set correctly
in the control panel for
the media that you are
using.
Table 12-6
Defects that can occur during printing (continued)
ENWW
Correcting print quality and copy quality problems
307