Replacing supplies, Locating supplies, Supply replacement guidelines – HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 247: Locating supplies supply replacement guidelines
Replacing supplies
When you use genuine HP supplies, the MFP automatically notifies you when supplies are nearly
depleted. The notification to order supplies allows ample time to order new supplies before they need
to be replaced. For more information about ordering supplies, see
Locating supplies
Supplies are identified by their labeling and their blue plastic handles.
The following figure illustrates the location of each supply item.
Figure 11-1
Supply item locations
1
Fuser
2
Print cartridges
3
Transfer unit
For information about staple cartridges, see
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the MFP.
●
Allow sufficient space above and in the front of the MFP for removing supplies.
●
The MFP should be located on a flat, sturdy surface.
For instructions on installing supplies, see the installation guides provided with each supply item or see
more information at
. When you connect, select Solve a
Problem.
CAUTION
Hewlett-Packard recommends the use of genuine HP products in this MFP. Use of
non-HP products may cause problems requiring service that is not covered by the Hewlett-
Packard extended warranty or service agreements.
ENWW
Replacing supplies
227