HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 344)

Printer memory and fonts
The MFP has two 200-pin DDR SDRAM slots. One slot is available for adding memory to the MFP. DDR
SDRAM memory is available in 128 and 256 MB modules.
NOTE Memory specification: HP Color LaserJet 4730mfp series use 200-pin small outline dual
inline memory modules (SODIMM) that support 128 or 256 MB of RAM.
The MFP also has three flash memory card slots for MFP firmware, fonts, and other solutions.
● The first flash memory card is reserved for MFP firmware.
NOTE Use the first flash memory card slot for firmware only. The slot is marked "Firmware
Slot".
● The two additional flash memory card slots enable the user to add fonts and third-party solutions,
such as signatures and personalities. The slots are marked "Slot 2" and "Slot 3."
NOTE Flash memory cards adhere to Compact Flash specifications and size.
CAUTION Do not insert a flash memory card that is designed for use with a digital camera into
the MFP. The MFP does not support photo printing directly from a flash memory card. If you
install a camera-type flash memory card, the control panel displays a message asking if you want
to reformat the flash memory card. If you choose to reformat the card, all data on the card will be
lost.
You might want to add more memory to the MFP if you often print complex graphics or PS documents,
or use many downloaded fonts. Additional memory also allows the MFP to print multiple, collated copies
at the maximum speed.
NOTE Single in-line memory modules (SIMMs) / dual in-line memory modules (DIMMs) used
on previous HP LaserJet printers are not compatible with the MFP.
NOTE To order DDR SDRAM, see Supplies and accessories .
Before ordering additional memory, see how much memory is currently installed by printing a
configuration page.
Printing a configuration page
1. Press Menu to enter the MENUS.
2. Touch INFORMATION .
3. Touch PRINT CONFIGURATION .
324 Appendix A Working with memory and print server cards ENWW