HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 70)

Print quality submenu
You can gain access to some of the items in this menu in either a software program, or in the printer
driver (if the correct printer driver is installed). Printer driver settings and software program settings
override control-panel settings.
To gain access to this menu, touch CONFIGURE DEVICE , and then touch PRINT QUALITY .
Item Values Explanation
ADJUST COLOR HIGHLIGHTS
MIDTONES
SHADOWS
RESTORE COLOR VALUES
This item allows you to adjust the color
from +5 to –5.
Each value allows you to adjust CYAN
DENSITY, MAGENTA DENSITY,
YELLOW DENSITY, and BLACK
DENSITY
RESTORE COLOR VALUES removes
any color adjustments and returns the
color to the original value.
SET REGISTRATION PRINT TEST PAGE
SOURCE
ADJUST TRAY N
Shift the margin alignment to center the
image on the page from top to bottom,
and left to right. You can also align the
image on the front, with the image printed
on the back.
AUTO SENSE MODE TRAY 1 SENSING
TRAY 2-N SENSING
Allows you to set trays to automatically
sense the type of paper that is loaded.
PRINT MODES PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
LIGHT <75 G/M2
INTERMEDIATE90-104
HEAVY 105-119 G/M2
EXTRA HEAVY120-163
CARDSTOCK >163
ROUGH 90-105 G/M2
GLOSSY 75-105 G/M2
HEAVY GLOSSY120-160
Allows you to associate each media type
with a specific print mode.
50 Chapter 2 Using the control panel ENWW