HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 67
Item
Values
Explanation
DEFAULT PAPER SIZE
LETTER*
LEGAL
EXECUTIVE
STATEMENT
8.5X13
A4
A5
B5(JIS)
EXECUTIVE(JIS)
16K
ENVELOPE #10
ENVELOPE MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
Set the default image size for paper
and envelopes. (The item name will
change from paper to ENVELOPE as
you scroll through the available sizes.)
DEFAULT CUSTOM PAPER SIZE
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Allows you to set a custom paper size
for any of the installed trays. Substitute
the tray number for
and Y dimensions of the custom paper
size. The X dimensions are
76-216 mm (3-8.5 inches). The Y
Dimensions are 127-356 mm
(5-14 inches).
PAPER DESTINATION
OUTPUT BIN 1*
OUTPUT BIN 2
OUTPUT BIN 3
Select the output bin on the optional 3-
bin mailbox.
NOTE
This item appears
only if an optional 3-bin
mailbox is installed, and if it is
not configured for stacker
mode.
DUPLEX
OFF
ON*
DUPLEX BINDING
Set the value to ON to print on both
sides (duplex) or OFF to print on one
side (simplex) of a sheet of paper.
DUPLEX BINDING allows you to
select
LONG EDGE
or
SHORT
EDGE
*. This item displays only if
DUPLEX is set to ON.
For more information, see
OVERRIDE A4/LETTER
NO
This command is used to print on
Letter-size media when an A4 job is
ENWW
Configure device menu
47