Pcl submenu – HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 69
PCL submenu
To gain access to this menu, touch
CONFIGURE DEVICE
, touch
PRINTING
, and then touch
PCL
submenu.
Item
Values
Explanation
FORM LENGTH
5 to 128
Default=60
Sets vertical spacing from 5 to 128 lines for
default paper size. Enter the value by using the
numeric keypad.
ORIENTATION
PORTRAIT*
LANDSCAPE
Select the default page orientation.
NOTE
It is recommended that you set
the page orientation in the printer driver
or in the software program. (Printer-
driver settings and software-program
settings override control-panel settings.)
FONT SOURCE
INTERNAL X*
CARD SLOT X
INTERNAL X: Internal fonts.
CARD SLOT 1, CARD SLOT 2, or CARD SLOT
3: Fonts stored in one of the three flash memory
slots.
FONT NUMBER
0 to 102
The MFP assigns a number to each font and lists
them on the PCL Font List (see
). The font number appears in the
Font # column of the printout.
FONT PITCH
0.44 to 99.99
Use the numeric keypad to enter a value. This
item might not appear, depending on the font
selected.
Default=10.00
FONT POINT SIZE
4.00 to 999.75
Use the numeric keypad to enter a value.
Default=12.00
SYMBOL SET
Variety of available
symbol sets
Select any one of several available symbol sets
at the MFP control panel. A symbol set is a unique
grouping of all the characters in a font. PC–8 or
PC–850 is recommended for line-draw
characters.
APPEND CR TO LF
NO*
YES
Select
YES
to append a carriage return to each
line feed that is encountered in backward-
compatible PCL jobs (pure text, no job control).
Some environments, such as UNIX, indicate a
new line by using only the line-feed control code.
This option allows the user to append the required
carriage return to each line feed.
SUPPRESS BLANK PAGES
NO*
YES
When set to YES, form feeds are ignored if the
page is blank.
MEDIA SOURCE MAPPING
STANDARD*
CLASSIC
The PCL5 MEDIA SOURCE MAPPING
command selects an input tray by a number that
maps to the available trays and feeders.
ENWW
Configure device menu
49