HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 72)

Item Values Explanation
The TIME FORMAT is 12 HR or 24 HR.
This item defaults to 12 HR.
JOB STORAGE LIMIT 1 to 100 Specifies the number of QuickCopy and
Proof-and-Hold jobs that can be stored
on the MFP hard-disk accessory.
Default=32
JOB HELD TIMEOUT OFF*
1 HOUR
4 HOURS
1 DAY
1 WEEK
Sets the amount of time that QuickCopy
and proof-and-hold jobs are kept before
being automatically deleted from the
queue.
If you change the Job Held Timeout
value, only jobs that are stored after this
change are affected by the change. Any
jobs that were stored before you
changed the value will retain the original
timeout setting.
SHOW ADDRESS AUTO
OFF*
This item defines whether the IP address
is shown on the control-panel display
next to the Ready message.
The default setting is OFF.
COLOR/BLACK MIX AUTO*
MOSTLY COLOR PAGES
MOSTLY BLACK PAGES
This menu item establishes how the
printer switches from color to
monochrome (black and white) mode for
maximum performance and print
cartridge life.
AUTO resets the printer to the factory
default settings. The default is AUTO.
Select MOSTLY COLOR PAGES if
nearly all of your print jobs are color with
high page coverage.
Select MOSTLY BLACK PAGES if you
print mostly monochrome jobs, or a
combination of color and monochrome
jobs.
TRAY BEHAVIOR USE REQUESTED TRAY
MANUALLY FEED PROMPT
PS DEFER MEDIA
SIZE/TYPE PROMPT
USE ANOTHER TRAY
DUPLEX BLANK PAGES
IMAGE ROTATION
Specifies the behavior of the tray by
indicating which tray the MFP should
print from.
USE REQUESTED TRAY sets the tray
that the MFP should print from for
specified jobs. The values for this menu
item are EXCLUSIVELY (default) or
FIRST.
MANUALLY FEED PROMPT
determines whether or not the MFP
prompts the user when a job does not
match a requested configured tray. The
values for this menu item are Always
(default) or UNLESS LOADED.
PS DEFER MEDIA determines whether
the paper-handling model is based on
52 Chapter 2 Using the control panel ENWW