beautypg.com

Solving problems with mac os x – HP Color LaserJet 4730 Multifunction Printer series User Manual

Page 339

background image

When connected with a USB cable, the printer does not appear in the Desktop Printer Utility or the Apple System Profiler after the
driver is selected.

Cause

Solution

This problem is caused by either a software or hardware component. Software troubleshooting

Check that your Macintosh supports USB.

Verify that your Macintosh operating system is Mac OS v9.1 or
later.

Ensure that your Macintosh has the appropriate USB software
from Apple.

NOTE

The iMac and Blue G3 desktop Macintosh systems

meet all of the requirements to connect to a USB device.

Hardware troubleshooting

Check that the printer is turned on.

Verify that the USB cable is connected correctly.

Check that you are using the appropriate high-speed USB cable.

Ensure that you do not have too many USB devices drawing
power from the chain. Disconnect all of the devices from the
chain and connect the cable directly to the USB port on the host
computer.

Check to see if more than two nonpowered USB hubs are
connected in a row on the chain. Disconnect all of the devices
from the chain and connect the cable directly to the USB port on
the host computer.

NOTE

The iMac keyboard is a nonpowered USB hub.

Solving problems with Mac OS X

Table 12-9

Problems with Mac OS X

The printer driver is not listed in the Print Center or Printer Setup Utility.

Cause

Solution

The printer software might not have been installed or was installed
incorrectly.

Make sure that the printer PPD is in the following hard-drive folder:
Library/Printers/PPDs/Contents/Resources/
.lproj, where is the two-letter language code for
the language that you are using. If necessary, reinstall the software.
See the getting started guide for instructions.

The Postscript Printer Description (PPD) file is corrupt.

Delete the PPD file from the following hard-drive folder: Library/
Printers/PPDs/Contents/Resources/.lproj,
where is the two-letter language code for the language that
you are using. Reinstall the software. See the getting started guide
for instructions.

Table 12-8

Problems with Mac OS v9.x (continued)

ENWW

Troubleshooting common Macintosh problems

319