HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 233)

1 Device Information lists the serial number, page counts, firmware datecodes, maintenance-kit counts, calibration
information, color density, and other information for the MFP.
2 Installed Personalities and Options lists all MFP languages that are installed (such as PCL and PS), and lists options
that are installed in each DIMM slot and EIO slot.
3 Calibration Information lists the last CPR and last DMax/DHalf calibrations.
4 Color Density shows current settings for highlights, midtones, and shadows.
5 Memory lists the MFP memory information, PCL Driver Work Space (DWS), and I/O buffering and Resource Saving
information.
6 Event Log lists the number of entries in the log, the maximum number of entries viewable, and the last three entries.
The second page of the event log is the manufacturer page. This page contains information that might assist HP Customer
Care representatives in solving possible MFP problems.
7 Security lists the status of the control-panel lock, control-panel password, and disk drive.
8 Paper Trays and Options lists the size settings for all trays and lists paper-handling accessories that are installed.
NOTE The content of the configuration page varies, depending on the options that are currently
installed in the MFP.
HP Jetdirect page
The second configuration page is the HP Jetdirect page, which contains the following information:
ENWW Checking the MFP configuration 213