HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 194)

4. Select the Device Settings tab.
5. Use either of the following methods to select the stapler/stacker.
● Scroll down to Automatic Configuration, select Update Now, and click Apply.
● Scroll down to Accessory Output Bin, select HP 500 sheet stapler/stacker or HP 700 Sheet
3-bin Mailbox, and click Apply.
Macintosh
1. Open the Printer Center utility.
2. Select HP Color LaserJet 4730.
3. On the File menu, click on Show Info (command, i).
4. Select the Installable Options tab.
5. Scroll to Accessory Output Bins and select HP 500 sheet stapler/stacker or HP 700 Sheet 3-
bin Mailbox.
6. Click on Apply Changes.
To select the operating mode at the control panel
1. Press Menu.
2. Scroll to and touch CONFIGURE DEVICE .
3. Scroll to and touch MBM-3 CONFIGURATION .
4. Touch OPERATION MODE . Select the operation mode that you want to use.
5. Touch OK .
To configure a destination bin at the control panel (Mailbox and Function-
separator modes)
1. Touch Menu .
2. Scroll to and touch CONFIGURE DEVICE .
3. Touch PRINTING , COPYING , or FAX .
4. Touch PAPER DESTINATION . Select the output bin that you want to use.
5. Touch OK .
To select the operating mode in the printer driver (Windows 2000 and Windows
XP)
1. Click the Start button, point to Settings, and then click Printers (for Windows 2000) or Printers
and Faxes (for Windows XP).
2. Right-click the HP product icon, and then click Properties or Printing Preferences.
3. Click the Device Settings tab.
4. Perform one of the following actions:
174 Chapter 9 Optional output devices ENWW