HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 78)

Item Values Explanation
FIND SEND GATEWAYS No value to select This item searches the network for both
SMTP and LDAP gateways that can be
used to send e-mail.
SMTP GATEWAY No value to select This is the IP address of the SMTP
Gateway that is used for sending e-mail.
LDAP GATEWAY No value to select This is the IP address of the LDAP
Gateway that is used for looking up e-
mail address information.
JETDIRECT See submenu below. JETDIRECT allows you to configure
network settings.
TEST SEND GATEWAYS No value to select Tests the configured gateways to ensure
that they are functional.
Embedded Jetdirect submenu
To gain access to this menu, touch CONFIGURE DEVICE , and then touch I/O and then touch
JETDIRECT .
Item Options Values Explanation
TCP/IP ENABLE ON
OFF
ON: (default) Enable the TCP/IP
protocol.
OFF: Disable the TCP/IP protocol.
HOST NAME An alphanumeric string, up to 32
characters, that is used to identify the
device. This name is listed on the
Jetdirect configuration page. The
default host name is NPIxxxxxx,
where xxxxxx is the last six digits of
the LAN hardware (MAC) address.
CONFIG METHOD BOOTP
DHCP*
AUTO IP
MANUAL
Select BOOTP (Bootstrap Protocol)
for automatic configuration from a
BootP server.
Select DHCP (Dynamic Host
Configuration Protocol) for automatic
configuration from a DHCP server.
Select AUTO IP for automatic link-
local IP addressing. An address in
the form 169.254.x.x will be
automatically assigned.
Use the MANUAL settings menu to
configure TCP/IP parameters.
DHCP RELEASE YES
NO*
If DHCP is used and a DHCP lease
exists, selecting NO saves the
current lease. Selecting YES
releases the current DHCP lease and
the leased IP address.
58 Chapter 2 Using the control panel ENWW