HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 230)

Setting the sleep delay
Use the sleep-delay feature to set the period of time that the MFP must be idle before it enters the sleep
mode.
NOTE If the sleep-delay feature is turned off in the Reset menu, the MFP never enters the sleep
mode. Selecting a sleep delay value automatically turns the sleep feature on. The default value
for the sleep delay setting is 45 minutes.
To set the sleep delay
1. Press Menu .
2. Scroll to and touch CONFIGURE DEVICE .
3. Scroll to and touch SYSTEM SETUP .
4. Touch SLEEP DELAY .
5. Scroll to and touch the sleep-delay setting that you want.
6. The settings are saved and the control panel returns to the SYSTEM SETUP submenu.
7. Touch EXIT to exit the menu.
210 Chapter 11 Managing and maintaining the MFP ENWW