HP XP RAID Manager Software - Manual (Page 97)

Using RAID Manager 97
Example C:\HORCM\test>chgac1 /A:RMadin Scsi
Scsi3: -> \Device\Scsi\sym_hi2
\\,\Scsi3: : chnged to allow ‘RMadmin’
Scsi4: -> \Device\Scsi\q122001
\\.\Scsi4: : changed to allow ‘RMadmin’
Scsi0: -> \Device\Ide\IdePort0
\\.\Scsi0: : changed to allow ‘RMadmin’
Scsi1: -> \Device\Scsi\aic78xx1
\\.\Scsi1: : changed to allow ‘RMadmin’
csi2: -> \Device\Scsi\sym_hi1
\\.\Scsi2: : changed to allow ‘RMadmin’
To add a user name to one or more SCSI ports:
1. Enter: chgacl /A:<user_name> <SCSIX> …
Example 1 chgacl /A:RMadmin Scsi0
Example 2 chgacl /A:RMadmin Scsi0 Scsi1 Scsi2
Allowing different levels of access to a Device Object
chgacl.exe allows you to set a combination of read, write, execute or “all”
access rights to a Device Object. If no permission parameter is given,
chgacl
grants “all” access to the Device Object.
An RM user needs read, write and execute rights to the command device in
order to start a HORCM instance.
Enter: chgacl /A:<user_name> [/P:A-R-W-E] <object_name> ...
Example (Grant read and write access for the user “horcm” to all physical drives.)
chgacl /A:horcm /P:R-W Phys
Deleting a user name from the access control list of the Device
Object
Caution
The first two commands below may delete the user’s privileges to access the
system drive (C:\). To prevent this, ensure that no is
mapped to the system drive (C:\)