HP XP RAID Manager Software - Manual (Page 389)

Porting notice for OpenVMS 389
Known issues and concerns
Rebooting on PAIR state (writing disabled)
OpenVMS does not show the volumes with writing disabled (e.g.,
SVOL_PAIR) at system startup; therefore, the S-VOLs are hidden when
rebooting in PAIR state or SUSPEND-mode.
You can verify that the show device and inqraid commands do not show
the S-VOLs after a reboot as shown below (that is, DGA148 and DGA150
devices are in the SVOL_PAIR state and do not display).
$ sh dev dg
$ inqraid DKA145-153 -cli
Device Name Device Status Error
Count
Volume
Free
Trans Mnt
Label Blocks Count Cnt
$1$DGA145: (VMS4) Online 0
$1$DGA146: (VMS4) Online 0
$1$DGA147: (VMS4) Online 0
$1$DGA149: (VMS4) Online 0
$1$DGA151: (VMS4) Online 0
$1$DGA152: (VMS4) Online 0
$1$DGA153: (VMS4) Online 0
DEVICE_FILE PORT SERIAL LDEV CTGC/B/12 SSID R:GroupPRODUCT_ID
DKA145 CL1-H 30009 145 - - - - OPEN-9-CM
DKA146 CL1-H 30009 146 - s/P/ss 0004 5:01-11 OPEN-9
DKA147 CL1-H 30009 147 - s/S/ss 0004 5:01-11 OPEN-9
DKA148 - - - - - - - -
DKA149 CL1-H 30009 149 - P/s/ss 0004 5:01-11 OPEN-9
DKA150 - - - - - - - -
DKA151 CL1-H 30009 151 - P/s/ss 0004 5:01-11 OPEN-9