HP XP RAID Manager Software - Manual (Page 89)

Using RAID Manager 89
Naming the $HORCMPERM file
UNIX systems
The $HORCMPERM variable is set by default to either
/etc/horcmperm.conf
or /etc/horcmpermn.conf (where n is the RM
instance number).
Example
(HP-UX)
cat $HORCMPERM | /HORCM/usr/bin/raidscan -find inst
# The following is an example to show permitted LVM
# Volume groups.
# For MU# 0
vg00 /dev/rdsk/c0t3d0 /dev/rdsk/c0t3d1
vg00 /dev/rdsk/c0t3d2 /dev/rdsk/c0t3d3
# For MU# 1
vg01 /dev/rdsk/c0t3d0 /dev/rdsk/c0t3d1
vg01 /dev/rdsk/c0t3d2 /dev/rdsk/c0t3d3
Verifying a group for vg01:
The following example verifies whether an LVM volume group is mapped
to a group (MU#1 for BC) in the horcm.conf file correctly.
# export HORCC_MRCF=1
# cat /etc/horcmperm.conf | grep vg01 | raidscan -find verify 1 -fd
OR
# vgdisplay -v /dev/vg01|grep dsk|sed
's/\/*\/dsk\//\/rdsk\//g'|raidscan -find verify 1 -fd
DEVICE_FILE Group PairVol Device_File M SERIAL LDEV
/dev/rdsk/c0t3d0 oradb1 oradev1 c0t3d0 1 35013 17
/dev/rdsk/c0t3d1 oradb1 oradev2 c0t3d1 1 35013 18
/dev/rdsk/c0t3d2 oradb oradev3 c0t3d2 1 35013 19
/dev/rdsk/c0t3d3 - - - 1 35013 20