HP XP RAID Manager Software - Manual (Page 310)

310 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Commands from HOSTD shown on page 302 (group Oradb2)
• Set the HORCC_MRCF environment variable. (If C shell)
# setenv HORCC_MRCF 1
(Windows NT/2000/2003) set HORCC_MRCF=1
• Designate a group name and a remote host P-VOL:
# paircreate -g Oradb2 -vr
This command begins a pair coupling between the two pairs of
volumes designated as Oradb2 in the configuration definition file.
• Designate a volume name (oradev2-1) and a remote host P-VOL:
# paircreate -g Oradb2 -d oradev2-1 -vr
In the example configuration, this pairs CL1-A, T1, L1 and
CL2-D, T2, L1
• Designate a group name and confirm pair volume state:
# pairdisplay -g Oradb2
Group PairVol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status, Seq#, P-LDEV# M
oradb oradev2-1(L) (CL2-D, 2, 1-0) 30053 24..S-VOL COPY ----- 18 -
oradb oradev2-1(R) (CL1-A, 1, 1-2) 30053 18..P-VOL COPY 30053 24 -
oradb oradev2-2(L) (CL2-D, 2, 2-0) 30053 25..S-VOL COPY ----- 19 -
oradb oradev2-2(R) (CL1-A, 1, 2-2) 30053 19..P-VOL COPY 30053 25 -