HP XP RAID Manager Software - Manual (Page 131)

RAID Manager command reference 131
Additional
Information
If you create an S-VOL with the “Noread” option and reboot the Windows
2000/2003 system, the system will be unable to create a Device object
(\Device\HarddiskVolume#) and Volume {GUID} for that SVOL. A
Device object (\Device\HarddiskVolume#) and Volume{GUID} can be
created, using the -svinf option to the inqraid command (on a suspended
SVOL).
\Device\HarddiskVolume#( number ) is assigned in sequential order by the
-svinf
option. This number will be valid as long as the system configuration
does not change.
Use the –svinf -sort option to cause signature writes to occur in LDEV#
order as follows.
D:\HORCM\etc>echo hd5 hd4 hd3 | inqraid -svinf -sort
[VOL61459_451_5296A763] -> Harddisk3 [OPEN-3 ]
[VOL61459_452_5296A760] -> Harddisk4 [OPEN-3 ]
[VOL61459_453_5296A761] -> Harddisk5 [OPEN-3 ]
An example using the –fv option.
C:\HORCM\etc>inqraid -CLI $Vol -fv
DEVICE_FILE PORT SERIAL LDEV
CTG H/M/12 SSID R:Group PRODUCT_ID
Volume{cec25efe-d3b8-11d4-aead-00c00d003b1e}\Vol3\Dsk0 CL2-D 62496 256
- - - - OPEN-3-CVS-CM
An example using the –fp option:
# ls /dev/rdsk/c57t4* | ./inqraid -CLI -fp
DEVICE_FILE PORT SERIAL LDEV CTG C/B/12 SSID R:Group PRODUCT_ID
c57t4d0* CL1-D 62496 32 - s/P/ss 0004 5:01-03 OPEN-3
c57t4d3* CL1-D 62496 35 - s/P/ss 0004 5:01-03 OPEN-3
c57t4d4 CL1-D 62496 36 - s/P/ss 0004 5:01-01 OPEN-3
c57t4d5 CL1-D 62496 37 - s/P/ss 0004 5:01-02 OPEN-3