HP XP RAID Manager Software - Manual (Page 43)

Installation and configuration 43
Examples
HORCM_MON
blue horcm1 1000 3000
The RM instance is running on system blue, service name horcm1, with a
poll value of 10 seconds and a timeout value of 30 seconds.
HORCM_MON
NONE horcm1 1000 3000
The RM instance is running on system NONE, indicating two or more
network cards are installed in the server, or several networks (subnets) are
configured, and the RM listens on all networks. The service name is
horcm1 with a poll value of 10 seconds and a timeout value of 30 seconds.
Execute the raidqry –r group command on each host to examine multiple
network configurations. The following figure shows that the volume group
known as oradb is controlled from the right side of the diagram by host
HST1 (using either subnet A or B) and from the left side of the diagram by
either HST2 or HST3 (using either subnet A or B).
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
NONE horcm 1000 3000
.
.
HORCM_INST
#dev_group ip_address service
oradb HST2_IPA horcm
oradb HST3_IPA horcm
oradb HST2_IPB horcm
oradb HST3_IPB horcm
IPA IPB
horcm
HST3
IPA IPB
horcm
HST2
IPA IPB
horcm
HST1
SubnetA
SubnetB
XP512/XP48/XP1024/XP128 XP512/XP48/XP1024/XP128
PVOL SVOL
Oradb
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
NONE horcm 1000 3000
.
.
HORCM_INST
#dev_group ip_address service
oradb HST1_IPA horcm
oradb HST1_IPB horcm
XP Array XP Array