HP XP RAID Manager Software - Manual (Page 93)

Using RAID Manager 93
(Windows
NT/2000/2003
type $HORCMPERM | x:\HORCM\etc\raidscan.exe -find inst
• If no RM permission file exists, then /etc/horcmgr executes this
built-in command to permit all volumes owned by the host.
(HP-UX) ioscan –fun | grep rdsk | /HORCM/usr/bin/raidscan –find inst
(Linux) ls /dev/sd* | /HORCM/usr/bin/raidscan -find inst
(Solaris) ls /dev/rdsk/* | /HORCM/usr/bin/raidscan -find inst
(AIX) lsdev -C -c disk | grep hdisk | /HORCM/usr/bin/raidscan -find
inst
(Tru64 UNIX) ls /dev/rdisk/dsk* | /HORCM/usr/bin/raidscan -find inst
(Digital UNIX) ls /dev/rrz* | /HORCM/usr/bin/raidscan -find inst
(DYNIX/ptx) /etc/dumpconf -d | grep sd | /HORCM/usr/bin/raidscan -find
inst
(MPE/iX) callci dstat | /HORCM/usr/bin/raidscan -find inst
(Windows
NT/2000/2003)
x:\HORCM\etc\raidscan.exe -pi $PhysicalDrive -find inst
• If $HORCMPERM is set to MGRNOINST, /etc/horcmgr does not
execute the built-in command.
This executes a system command to permit the volumes specified
from a user's shell script.
OpenVMS $ inqraid dka145-146
Identifying a command device using protection mode
The SCSI inquiry output cannot be changed to identify a command device
in protection mode. The horcctl –D –C command designates a protection
mode command device by appending ‘*’ to the device file name as follows:
(HP-UX) # horcctl –D
Current control device = /dev/rdsk/c0t0d0*